customs brokerage, freight forwarding and truck transportation

Initiation of Antidumping Duty Investigation: Mattresses from the People’s Republic of China

: US Customs

U.S. Commerce Department Begins Antidumping Investigation Into Certain Mattresses Made In China 2018-10-12

Dear Valued Customer, 

On October 9, 2018, the Department of Commerce (Commerce) initiated its less-than-fair-value duty investigation on “Mattresses from the People’s Republic of China” (Initiation Notice). This investigation has been assigned the following case number: A-570-092.
 
The Scope of Merchandise covered by this investigation reads as follows:
 
The scope of this investigation covers all types of youth and adult mattresses. The term “mattress” denotes an assembly of materials that at a minimum includes a “core,” which provides the main support system of the mattress, and may consist of innersprings, foam, other resilient filling, or a combination of these materials. Mattresses may also contain:
 
(1) “upholstery,” the material between the core and the top panel of the ticking on a single-sided mattress, or between the core and the top and bottom panel of the ticking on a double-sided mattress; and/or
(2) “ticking,” the outermost layer of fabric or other material (e.g., vinyl) that encloses the core and any upholstery, also known as a cover.
 
The scope of this investigation is restricted to only “adult mattresses” and “youth mattresses.” “Adult mattresses” have a width exceeding 35 inches, a length exceeding 72 inches, and a depth exceeding 3 inches on a nominal basis. Such mattresses are frequently described as “twin,” “extra-long twin,” “full,” “queen,” “king,” or “California king” mattresses. “Youth mattresses” have a width exceeding 27 inches, a length exceeding 51 inches, and a depth exceeding 1 inch (crib mattresses have a depth of 6 inches or less from edge to edge) on a nominal basis. Such mattresses are typically described as “crib,” “toddler,” or “youth” mattresses. All adult and youth mattresses are included regardless of actual size description.
 
The scope encompasses all types of “innerspring mattresses,” “non-innerspring mattresses,” and “hybrid mattresses.” “Innerspring mattresses” contain innersprings, a series of metal springs joined together in sizes that correspond to the dimensions of mattresses. Mattresses that contain innersprings are referred to as “innerspring mattresses” or “hybrid mattresses.” “Hybrid mattresses” contain two or more support systems as the core, such as layers of both memory foam and innerspring units.
 
Non-innerspring mattresses” are those that do not contain any innerspring units. They are generally produced from foams (e.g., polyurethane, memory (viscoelastic), latex foam, gel-infused viscoelastic (gel foam), thermobonded polyester, polyethylene) or other resilient filling.
 
Mattresses covered by the scope of this investigation may be imported independently, as part of furniture or furniture mechanisms (e.g., convertible sofa bed mattresses, sofa bed mattresses imported with sofa bed mechanisms, corner group mattresses, day-bed mattresses, roll-away bed mattresses, high risers, trundle bed mattresses, crib mattresses), or as part of a set in combination with a “mattress foundation.” “Mattress foundations” are any base or support for a mattress. Mattress foundations are commonly referred to as “foundations,” “boxsprings,” “platforms,” and/or “bases.” Bases can be static, foldable, or adjustable. Only the mattress is covered by the scope if imported as part of furniture, with furniture mechanisms, or as part of a set in combination with a mattress foundation.
 
Excluded from the scope of this investigation are “futon” mattresses. A “futon” is a bi-fold frame made of wood, metal, or plastic material, or any combination thereof, that functions as both seating furniture (such as a couch, love seat, or sofa) and a bed. A “futon mattress” is a tufted mattress, where the top covering is secured to the bottom with thread that goes completely through the mattress from the top through to the bottom, and it does not contain innersprings or foam. A futon mattress is both the bed and seating surface for the futon.
 
Also excluded from the scope are airbeds (including inflatable mattresses) and waterbeds, which consist of air- or liquid-filled bladders as the core or main support system of the mattress.
 
Further, also excluded from the scope of this investigation are any products covered by the existing antidumping duty order on uncovered innerspring units. See Uncovered Innerspring Units from the People’s Republic of China: Notice of Antidumping Duty Order, 74 FR 7661 (February 19, 2009).
 
The products subject to this investigation are currently properly classifiable under Harmonized Tariff Schedule for the United States (HTSUS) subheadings: 9404.21.0010, 9404.21.0013, 9404.29.1005, 9404.29.1013, 9404.29.9085, and 9404.29.9087. Products subject to this investigation may also enter under HTSUS subheadings: 9404.21.0095, 9404.29.1095, 9404.29.9095, 9401.40.0000, and 9401.90.5081. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise subject to this investigation is dispositive.
 
Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.
 
Deadline for Submitting Comments:

As announced in the Initiation Notice, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determination, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on October 29, 2018, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on November 8, 2018, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigation may be relevant, the party may contact Commerce and request permission to submit the additional information.

Required Entry of Appearance:

Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.

All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.

For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
Required Certifications:

Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available here.

For Further Information Contact:

 
AD/CVD Operations
Enforcement and Compliance, U.S. Department of Commerce,
14th Street and Constitution Avenue, NW,
Washington, DC 20230
Stephen Bailey or Lilit Astvatsatrian at (202) 482-0193 or (202) 482-6412, respectively.

Read the complete text of CSMS # 18-000602 on the website of U.S. Customs and Border Protection (CBP).
 

Thank you for being our Valued Customer. If you have any questions, please do not hesitate to contact Milgram-C.H. Robinson for further information.
 
Source: CBP 
 
Our information is compiled from a number of sources that to the best of our knowledge are accurate and correct. It is always the intent of our company to present accurate information. C.H. Robinson accepts no liability or responsibility for the information published herein.
www.chrobinson.com 
© 2018 C.H. Robinson Worldwide Inc. All Rights Reserved.

 

Share
: CLIENT LOGIN

Milgram has developed a reputation for providing the highest level of service in the fields of Customs Brokerage, International Freight Forwarding and Ground Transportation.

We strive to make things simple for our clients by doing them better, and work hard to meet and exceed our clients expectations.

Montreal
Tel: 514-288-2161
Fax: 514-288-2519
Toll-Free: 1-888-MILGRAM (645-4726)

Dorval
Tel: 514-695-3585
Fax: 514-695-7268

Toronto
Tel: 905-673-1568
Fax: 905-673-9463

Vancouver
Tel: 604-821-1677
Fax: 604-821-1644


Milgram has developed a reputation for providing the highest level of service in the fields of Customs Brokerage, International Freight Forwarding and Ground Transportation.

We strive to make things simple for our clients by doing them better, and work hard to meet and exceed our clients expectations.

Montréal514-288-2161Dorval514-695-3585Toronto905-673-1568Toronto Warehouse905-677-3997Vancouver604-821-1677Toll-Free1-888-MILGRAM (645-4726)
FMC Organization No. 024711
Would you like to download the Milgram app for BlackBerry?Yes No